THIS IS A POST ONLY WITH NO BALLS. ONLY INDUSTRIAL STRENGTH BRAND ENDS WILL FIT THIS BARBELL.

• 18 gauge barbells have 2mm gems.
• 16 gauge barbells have 2.5mm gems.
• Brown and Blue Zircon gems NOT available in 2.5mm.
• Two piece design with one removable end.
• Made from ASTM F136 6AI-4V ELI implant grade titanium.
• End is countersunk for a smooth fit with barbell.
• Uses patented NeoMetal "snap-together" jewelry system.
• Top quality synthetic faceted gemstones.
• Autoclave safe.
• Low-profile, compact bezel setting maximizes gemstone visibility.
• Bezels are crimp-set. No glues or epoxy are used.
• The stone color in the picture is white opal.

• The two part dangling charm spells "LOVE". The top charm has the L and a gemmed heart for the O and the bottom charm has the V and E.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• The gemmed anchor dangles from the bottom gem ball.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• Has two butterfly charms. The larger top one has three round gems dangling from it. The bottom butterfly has one round gem dangling from it.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• Four round gems in teardrop settings dangle from the main dangle.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• The zipper handle dangles.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" clear gem ball unscrews.
• The bottom zipper charm does not unscrew.

• The charm has seven stars with a clear gem in each one.
• The charm is rounded on the back and hinged for comfort while wearing.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The anchor dangles from the bottom gem ball.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• Both the top and bottom gems are prong-set for maximum gem brilliance.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top gem setting unscrews.
• The bottom gem setting is fixed and does not unscrew.

• Has two charm dangles. The top charm has 3 stars with gems and the bottom charm has a moon with five gems.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• Has two charm dangles. The top cupcake charm has a bow charm dangling from it.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• Has a dangling brass knuckles charm with heart shaped finger holes.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• The dangling charm has one star with a single gem and another with six gems.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom gemmed star is fixed and does not unscrew.

• The black skull charm has heart shaped eyes and dangles from the bottom gem ball.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• The gun charm dangles from the bottom gem ball and has four gems in the handle.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• The dangling charm has two cherry gems and one leaf gem.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 7/32" gem ball is fixed and does not unscrew.

• The dangling bird charm has three gems on each wing and one for the eye.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• A cute penguin relaxes on this icy cold beverage.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• The bottom gem is a prong-set square or princess cut gem.
• The basket setting has holes on the sides and bottom to allow extra light to reach the gem.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The butterfly has four wing and one body gem all prong-set with open backs for lots of sparkle.
• The basket setting has holes on the sides and bottom to allow extra light to reach the gem.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The bottom gem is a prong-set star gem.
• The basket setting has holes on the sides and bottom to allow extra light to reach the gem.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• A gemmed peace sign dangles from the bottom ball.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• A gemmed rainbow dangles from the bottom ball.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• The zipper thingy is fixed to the barbell and the zipper pull thingy dangles from that. :-)
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• Three prong-set hearts all dangle individually from the prong-set heart fixed to the end of the barbell.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• Has two gemmed star dangles. The smaller top star hangs in front of the larger star when worn.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• Has a silver skull charm dangle.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• Has a painted palm charm with three pink gem coconuts that dangles from the bottom ball.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• The dangling amethyst stone star dangles from a prong-set faceted amethyst stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The angel wing charms dangle from a bezel-set clear gem ball.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• Includes two navel barbells that read "BEST FRIEND" when held together.
• The friend charm dangles from a prong-set pink gem.
• A pink gem-encrusted heart charm also dangles from the prong-set pink gem.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" pink gem ball unscrews.

• The dangling blue goldstone stone heart dangles from a prong-set faceted blue goldstone stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The dangling blue goldstone stone star dangles from a prong-set faceted blue goldstone stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The dangling black agate stone heart dangles from a prong-set faceted black agate stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The dangling black agate stone star dangles from a prong-set faceted black agate stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The dangling Green Aventurine stone heart dangles from a prong-set faceted Green Aventurine stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The dangling Green Aventurine stone star dangles from a prong-set faceted Green Aventurine stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• A heart charm with speared gem dangles from the prong-set gem fixed to the end of the barbell.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• A double heart charm with gems on the side dangles from the bezel-set gem fixed to the end of the barbell.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The dangling synthetic malachite stone heart dangles from a prong-set faceted synthetic malachite stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The dangling Synthetic Malachite stone star dangles from a prong-set faceted Synthetic Malachite stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The dangling Synthetic Opal stone heart dangles from a prong-set faceted Synthetic Opal stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews and has an Aurora Borealis gem.

• The dangling Synthetic Opal stone star dangles from a prong-set faceted Synthetic Opal stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews and has an Aurora Borealis gem.

• The dangling Rose Quartz stone heart dangles from a prong-set faceted Rose Quartz stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The dangling Rose Quartz stone star dangles from a prong-set faceted Rose Quartz stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The dangling Red Tiger's Eye stone heart dangles from a prong-set faceted Red Tiger's Eye stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The dangling Red Tiger's Eye stone star dangles from a prong-set faceted Red Tiger's Eye stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The pirate flag charm dangles from a prong-set clear gem.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The dangling Synthetic Turquoise stone heart dangles from a prong-set faceted Synthetic Turquoise stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The dangling Synthetic Turquoise stone star dangles from a prong-set faceted Synthetic Turquoise stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The double heart crown charm dangles from a prong-set clear gem.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The winged dragon charm dangles from a prong-set clear gem.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• A twist charm with a gem dangles from the bezel-set gem fixed to the end of the barbell.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• A twist charm with a gem hanging at the end dangles from the prong-set gem fixed to the end of the barbell.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• The dangling fairy charm has gemmed wings.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• One gemmed star is solid and hangs from a wire.
• The second star is a gemmed star outline and hangs from a chain.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.
• The bottom 5/16" gem ball is fixed and does not unscrew.

• The dangling amethyst stone heart dangles from a prong-set faceted amethyst stone.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• A two color butterfly charm dangles from the bezel-set gem fixed to the end of the barbell.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• A flower with prong-set gems is fixed to the top of the barbell.
• A twist charm with gems dangles from the top flower.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The bottom 3/16" ball unscrews.

• A round prong-set gem in an abstract setting dangles from the prong-set gem fixed to the bottom of the barbell.
• Another charm with three round bezel-set gems and a prong-set teardrop gem dangles from the bottom.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• A gemmed twist charm with a prong-set star gem dangles from the prong-set star gem fixed to the bottom of the barbell.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• An anchor charm dangles beneath a prong-set gem fixed to the bottom of the barbell.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• a brass knuckles charm dangles beneath a prong-set gem fixed to the bottom of the barbell.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• A flower with prong-set gems is fixed to the top of the barbell.
• A set of three prong-set leaf gem charms dangle from the top flower.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The bottom 3/16" ball unscrews.

• A flower with gems is fixed to the bottom of the barbell.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• A charm with a large prong-set heart shaped gem and eight prong-set round gems is fixed to the bottom of the barbell.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" ball unscrews.

• A heart shaped picture frame dangles from the prong-set gem fixed to the bottom of the barbell.
• The picture frame has a slot at the top for inserting any picture you like. The picture size is about 3/4" by 3/4".
• The picture is protected by a clear plastic cover.
• Isn't that dog cute? That's Kona the Steel Navel office mascot!
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" clear gem ball unscrews.

• A tribal heart navel shield is attached to the top of the barbell.
• The tribal heart navel shield is hinged where it attaches to the barbell for maximum comfort when worn.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The bottom 3/16" ball unscrews.

• A butterfly charm is fixed to the bottom of the barbell.
• The butterfly sits diagonally across the navel, as shown in picture.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" ball unscrews.

• A prong-set round gem is fixed to the bottom of the barbell.
• A triple twist charm dangles from the bottom.
• The curved navel barbell is a standard 14g.
• The wearable length is 3/8".
• The top 3/16" gem ball unscrews.

• This stainless steel curved eyebrow barbell is 16g with a wearable length of 5/16".
• The cherries and leaf are about 1/4" wide and high.
• The bottom removable ball is 3/32" or about 2mm.
• The barbell is externally threaded.

• This stainless steel curved eyebrow barbell is 16g with a wearable length of 5/16".
• The cross is about 1/8" wide by 7/32" tall.
• The bottom removable ball is 1/8" or about 3mm.
• The barbell is externally threaded.

• This stainless steel curved eyebrow barbell is 16g with a wearable length of 5/16".
• The dolphin is about 3/16" long.
• The bottom removable ball is 3/32".
• The barbell is externally threaded.

• This stainless steel curved eyebrow barbell is 16g with a wearable length of 3/8".
• The star is about 3/8" across.
• The bottom removable ball is 1/8" or about 3mm.
• The barbell is externally threaded.

• This stainless steel curved eyebrow barbell is 16g with a wearable length of 3/8".
• The iron cross is 1/4" in diameter.
• The bottom removable ball is 5/32".
• The barbell is externally threaded.

• This stainless steel curved eyebrow barbell is 16g with a wearable length of 5/16".
• The heart is 3/16" across.
• The bottom removable ball is 3/32" or about 2mm.
• The barbell is externally threaded.

• This stainless steel curved eyebrow barbell is 16g with a wearable length of 5/16".
• The moon is about 3/16" across.
• The bottom removable ball is 1/8" or about 3mm.
• The barbell is externally threaded.

• This stainless steel curved eyebrow barbell is 16g with a wearable length of 3/8".
• The nautical star is about 1/4" across.
• The bottom removable ball is 5/32" or about 4mm.
• The barbell is externally threaded.

• This stainless steel curved eyebrow barbell is 16g with a wearable length of 5/16".
• The peace sign is 3/16" in diameter.
• The bottom removable ball is 3/32" or about 2mm.
• The barbell is externally threaded.

• This stainless steel curved eyebrow barbell is 16g with a wearable length of 5/16".
• The star is about 5/32" across.
• The bottom removable ball is 1/8" or about 3mm.
• The barbell is externally threaded.

• This stainless steel curved navel barbell is 14g with a wearable length of 3/8" which is perfect for most navel piercings.
• The peace sign is about 5/8" across.
• The top removable gem ball is 3/16".
• The bottom fixed gem ball is 5/16".
• The barbell is externally threaded.

THIS IS A POST ONLY WITH NO BALLS. ONLY INDUSTRIAL STRENGTH BRAND ENDS WILL FIT THIS BARBELL.

• The medium 8 mm high skull in this ring is in a horizontal facing position.
• The LeRoi brand stainless steel captive bead ring is made from 316LVM ASTM F-138 implant grade stainless steel.
• The SkullDuggery by Leroi® skull is made from highly resistant Argentium® silver.

• The large 12 mm high skull in this ring is in a horizontal facing position.
• The LeRoi brand stainless steel captive bead ring is made from 316LVM ASTM F-138 implant grade stainless steel.
• The SkullDuggery by Leroi® skull is made from highly resistant Argentium® silver.

• A great choice for nostril piercings, facial piercings, and many ear piercings.
• You can choose from several labret gauges, disk sizes, and anodized titanium colors.
• The disk and labret post are a one-piece design. The disk is not removable.
• Various threadless ends are available for NeoMetal labret posts.
• Made from ASTM F136 6AI-4V ELI implant grade titanium.
• End is countersunk for a smooth fit with barbell.
• Uses patented NeoMetal "snap-together" jewelry system.

• This nostril screw retainer is made from a flexible acrylic.
• The shaft is 18 gauge and the ball is about 3/32" in diameter.
• The distance from the ball to the bend is 3/16" and the bend is about 1/4" across.

• Left bend glass nostril screws are for left nostril piercings.
• Useful as a nostril retainer to hide your piercing.
• Available in eight glass colors.
• Available in 18 gauge, 16 gauge, 14 gauge, and 12 gauge.
• The smooth round end is slightly larger than the nostril screw gauge.
• The length from round end to bend is approximately 1/4" on all gauges.
• PLEASE SEE THE GORILLA GLASS GAUGE FAQ FOR ACTUAL GAUGE SIZES.
• Autoclave safe.

• Right bend glass nostril screws are for right nostril piercings.
• Useful as a nostril retainer to hide your piercing.
• Available in eight glass colors.
• Available in 18 gauge, 16 gauge, 14 gauge, and 12 gauge.
• The smooth round end is slightly larger than the nostril screw gauge.
• The length from round end to bend is approximately 1/4" on all gauges.
• PLEASE SEE THE GORILLA GLASS GAUGE FAQ FOR ACTUAL GAUGE SIZES.
• Autoclave safe.

• Straight bend glass nostril screws work in left or right nostril piercings.
• Useful as a nostril retainer to hide your piercing.
• Available in eight glass colors.
• Available in 18 gauge, 16 gauge, 14 gauge, and 12 gauge.
• The smooth round end is slightly larger than the nostril screw gauge.
• The length from round end to bend is approximately 1/4" on all gauges.
• PLEASE SEE THE GORILLA GLASS GAUGE FAQ FOR ACTUAL GAUGE SIZES.
• Autoclave safe.

• Double flared checkerboard plug.
• All gauges have a 3/8" wearable length between the flares.
• No o-rings required.
• Checkerboard pattern is visible from both ends of plug.

• Double flared 3D skull plug.
• All gauges have a 3/8" wearable length between the flares.
• No o-rings required.
• The 3D skull is encased in clear acrylic within the black acrylic plug.
• Back end is slightly domed or convex.

• Stainless steel faceted gem saddle plug.
• All gauges have a 3/8" wearable length between the flares.
• No o-rings required.
• Back end is slightly domed or convex.
• Minimal bezel around gem maximizes CZ visibility.
• Bezel is crimp-set to hold gem. No glues or epoxy are used.
• Autoclave safe.

• This pair of double flared stone plugs are carved from opalite which is a synthetic opalized glass.
• Both ends of the plug are flat.
• These plugs are sold as a matched pair.
• The overall length on all gauges is about 7/16" and the wearable area between the double flares is about 5/16".
• As with all hand made organics, the gauge can vary slightly from the stated gauge. While Diablo Organics does a great job of matching the plugs within a pair, no two pairs will have the exact same color and pattern

• The logo image is encased in a slightly rounded dome of acrylic
• The back of the plug is flat and grooved for the included o-ring
• 2g through 0g have a 5/16" wearable area
• 00g through 1/2" have a 3/8" wearable area
• 9/16" through 1" have a 7/16" wearable area

• Hand carved from African Serpentine with a cabochon front flare.
• All gauges are grooved for the included clear o-rings.
• The o-ring groove is thin and smooth for minimal interference with your piercing.
• All gauges have a 5/16" wearable length between the front flare and the o-ring.
• All gauges have an overall length from end to end of about 1/2".
• Front flare on 10g, 8g, and 6g is about 6-7mm.
• Front flare on 4g is about 8mm.
• Front flare on 2g is about 9.5mm.
• Front flare on 0g is about 11mm.
• Front flare on 00g is about 12.5mm.
• Front flare on 7/16" is about 14mm.
• Front flare on 1/2" is about 16mm.

• Hand carved from Mint Opalite with a cabochon front flare.
• All gauges are grooved for the included clear o-rings.
• The o-ring groove is thin and smooth for minimal interference with your piercing.
• All gauges have a 5/16" wearable length between the front flare and the o-ring.
• All gauges have an overall length from end to end of about 1/2".
• Front flare on 10g, 8g, and 6g is about 6-7mm.
• Front flare on 4g is about 8mm.
• Front flare on 2g is about 9.5mm.
• Front flare on 0g is about 11mm.
• Front flare on 00g is about 12.5mm.
• Front flare on 7/16" is about 14mm.
• Front flare on 1/2" is about 16mm.

• Hand carved from Aventurine with a cabochon front flare.
• All gauges are grooved for the included clear o-rings.
• The o-ring groove is thin and smooth for minimal interference with your piercing.
• All gauges have a 5/16" wearable length between the front flare and the o-ring.
• All gauges have an overall length from end to end of about 1/2".
• Front flare on 10g, 8g, and 6g is about 6-7mm.
• Front flare on 4g is about 8mm.
• Front flare on 2g is about 9.5mm.
• Front flare on 0g is about 11mm.
• Front flare on 00g is about 12.5mm.
• Front flare on 7/16" is about 14mm.
• Front flare on 1/2" is about 16mm.

• Hand carved from Black Tibetan Agate with a cabochon front flare.
• All gauges are grooved for the included clear o-rings.
• The o-ring groove is thin and smooth for minimal interference with your piercing.
• All gauges have a 5/16" wearable length between the front flare and the o-ring.
• All gauges have an overall length from end to end of about 1/2".
• Front flare on 10g, 8g, and 6g is about 6-7mm.
• Front flare on 4g is about 8mm.
• Front flare on 2g is about 9.5mm.
• Front flare on 0g is about 11mm.
• Front flare on 00g is about 12.5mm.
• Front flare on 7/16" is about 14mm.
• Front flare on 1/2" is about 16mm.

• Hand carved from Rose Quartz with a cabochon front flare.
• All gauges are grooved for the included clear o-rings.
• The o-ring groove is thin and smooth for minimal interference with your piercing.
• All gauges have a 5/16" wearable length between the front flare and the o-ring.
• All gauges have an overall length from end to end of about 1/2".
• Front flare on 10g, 8g, and 6g is about 6-7mm.
• Front flare on 4g is about 8mm.
• Front flare on 2g is about 9.5mm.
• Front flare on 0g is about 11mm.
• Front flare on 00g is about 12.5mm.
• Front flare on 7/16" is about 14mm.
• Front flare on 1/2" is about 16mm.

• Hand carved from Hematite with a cabochon front flare.
• All gauges are grooved for the included clear o-rings.
• The o-ring groove is thin and smooth for minimal interference with your piercing.
• All gauges have a 5/16" wearable length between the front flare and the o-ring.
• All gauges have an overall length from end to end of about 1/2".
• Front flare on 10g, 8g, and 6g is about 6-7mm.
• Front flare on 4g is about 8mm.
• Front flare on 2g is about 9.5mm.
• Front flare on 0g is about 11mm.
• Front flare on 00g is about 12.5mm.
• Front flare on 7/16" is about 14mm.
• Front flare on 1/2" is about 16mm.

• Hand carved from Red Quartz with a cabochon front flare.
• All gauges are grooved for the included clear o-rings.
• The o-ring groove is thin and smooth for minimal interference with your piercing.
• All gauges have a 5/16" wearable length between the front flare and the o-ring.
• All gauges have an overall length from end to end of about 1/2".
• Front flare on 10g, 8g, and 6g is about 6-7mm.
• Front flare on 4g is about 8mm.
• Front flare on 2g is about 9.5mm.
• Front flare on 0g is about 11mm.
• Front flare on 00g is about 12.5mm.
• Front flare on 7/16" is about 14mm.
• Front flare on 1/2" is about 16mm.

• Hand carved from Mahogany Obsidian with a cabochon front flare.
• All gauges are grooved for the included clear o-rings.
• The o-ring groove is thin and smooth for minimal interference with your piercing.
• All gauges have a 5/16" wearable length between the front flare and the o-ring.
• All gauges have an overall length from end to end of about 1/2".
• Front flare on 10g, 8g, and 6g is about 6-7mm.
• Front flare on 4g is about 8mm.
• Front flare on 2g is about 9.5mm.
• Front flare on 0g is about 11mm.
• Front flare on 00g is about 12.5mm.
• Front flare on 7/16" is about 14mm.
• Front flare on 1/2" is about 16mm.

• Hand carved from Chinese Serpentine with a cabochon front flare.
• All gauges are grooved for the included clear o-rings.
• The o-ring groove is thin and smooth for minimal interference with your piercing.
• All gauges have a 5/16" wearable length between the front flare and the o-ring.
• All gauges have an overall length from end to end of about 1/2".
• Front flare on 10g, 8g, and 6g is about 6-7mm.
• Front flare on 4g is about 8mm.
• Front flare on 2g is about 9.5mm.
• Front flare on 0g is about 11mm.
• Front flare on 00g is about 12.5mm.
• Front flare on 7/16" is about 14mm.
• Front flare on 1/2" is about 16mm.

• Hand carved from carnelian agate with a cabochon front flare.
• All gauges are grooved for the included clear o-rings.
• The o-ring groove is thin and smooth for minimal interference with your piercing.
• All gauges have a 5/16" wearable length between the front flare and the o-ring.
• All gauges have an overall length from end to end of about 1/2".
• Front flare on 10g, 8g, and 6g is about 6-7mm.
• Front flare on 4g is about 8mm.
• Front flare on 2g is about 9.5mm.
• Front flare on 0g is about 11mm.
• Front flare on 00g is about 12.5mm.
• Front flare on 7/16" is about 14mm.
• Front flare on 1/2" is about 16mm.

• Hand carved from Red Tiger's Eye with a cabochon front flare.
• All gauges are grooved for the included clear o-rings.
• The o-ring groove is thin and smooth for minimal interference with your piercing.
• All gauges have a 5/16" wearable length between the front flare and the o-ring.
• All gauges have an overall length from end to end of about 1/2".
• Front flare on 10g, 8g, and 6g is about 6-7mm.
• Front flare on 4g is about 8mm.
• Front flare on 2g is about 9.5mm.
• Front flare on 0g is about 11mm.
• Front flare on 00g is about 12.5mm.
• Front flare on 7/16" is about 14mm.
• Front flare on 1/2" is about 16mm.

• Hand carved from Amazonite with a cabochon front flare.
• All gauges are grooved for the included clear o-rings.
• The o-ring groove is thin and smooth for minimal interference with your piercing.
• All gauges have a 5/16" wearable length between the front flare and the o-ring.
• All gauges have an overall length from end to end of about 1/2".
• Front flare on 10g, 8g, and 6g is about 6-7mm.
• Front flare on 4g is about 8mm.
• Front flare on 2g is about 9.5mm.
• Front flare on 0g is about 11mm.
• Front flare on 00g is about 12.5mm.
• Front flare on 7/16" is about 14mm.
• Front flare on 1/2" is about 16mm.

• Hand carved from Blue Lace Agate with a cabochon front flare.
• All gauges are grooved for the included clear o-rings.
• The o-ring groove is thin and smooth for minimal interference with your piercing.
• All gauges have a 5/16" wearable length between the front flare and the o-ring.
• All gauges have an overall length from end to end of about 1/2".
• Front flare on 10g, 8g, and 6g is about 6-7mm.
• Front flare on 4g is about 8mm.
• Front flare on 2g is about 9.5mm.
• Front flare on 0g is about 11mm.
• Front flare on 00g is about 12.5mm.
• Front flare on 7/16" is about 14mm.
• Front flare on 1/2" is about 16mm.

• Hand carved from black onyx with a cabochon front flare.
• All gauges are grooved for the included clear o-rings.
• The o-ring groove is thin and smooth for minimal interference with your piercing.
• All gauges have a 5/16" wearable length between the front flare and the o-ring.
• All gauges have an overall length from end to end of about 1/2".
• Front flare on 10g, 8g, and 6g is about 6-7mm.
• Front flare on 4g is about 8mm.
• Front flare on 2g is about 9.5mm.
• Front flare on 0g is about 11mm.
• Front flare on 00g is about 12.5mm.
• Front flare on 7/16" is about 14mm.
• Front flare on 1/2" is about 16mm.